|
Refrigerated
Centrifuge System
InterTest's
2001-E Centrifuge represents the latest advancements in safety,
performance and ergonomic design for constant acceleration testing
of microelectronic components. The 2001-E meets or exceeds MIL-STD-883,
Method 2001, Condition A-E; MIL-STD-750, and other HIGH-REL requirements.
|
|
 |
| User-Friendly
Design |
|
Exceptionally
quiet operation
Unique design keeps operating noise levels at less than 70
db.
Easy-open
chamber
Non-vacuum design eliminates the need for bulky chamber door.
|
|
|
| Easy
to Operate and Maintain |
|
Built-in
Diagnostics
Continuously self-monitored system displays error messages
for 12 condition parameters.
Low
Maintenance Design
Direct drive eliminated the need for belt replacement and
increases spindle and bearing life.
Fixture
Compatibility
Full compatibility with most standard industry fixtures eliminates
the need for large fixture inventories.
Easy
Speed Verification
Easy access external jacks ensure conformance to speed parameters.
|
|
|
| High
Reliability and Integrity |
|
Exceeds
MIL-STD-883 and High-Rel Specifications
The system is designed to meet or exceed MIL-STD-883, Method
2001, Conditions A through E, MIL-STD-750, Method 2006, and
other HIGH-REL commercial equivalents.
Built-in
Refrigeration System
Refrigeration system with full, 5-year warranty eliminates
vacuum related failures. System provides highly accurate temperature
control and cool operation for maximum bearing life.
Patented
Direct-Drive
Provides precise spin-speed control while eliminating stress
and maintenance problems associated with belt-drive systems
|
|
|
| Safe
Operation |
|
Safety-Plus
Chamber Design
The Safety-Plus chamber is designed with a stainless steel
chamber wall, cushioned by a layer of insulating foam and
surrounded by a full 1/2" thick carbon steel containment ring.
The containment ring rotates to absorb energy in the event
that load separation penetrates the first two protective layers,
thereby keeping the centrifuge in place on the floor. In addition,
the fully interlocked door is constructed with over 1 1/2"
of lightweight, energy absorbing material backed by 1/4" carbon
steel to safely contain any minimal upward forces that might
occur during load separation.
Out-of-Balance
Protection
Advanced, non-contact piezoelectric crystal immediately detects
when out-of-balance condition exists.
Interlocks
and Alarms
Includes door closure interlocks and alarms for overspeed,
overtemp, out-of-balance, entry error and other faults.
|
|
|
| BACK
TO TOP |
 |
|
Controls/Displays: |
|
G-Force:
0-32,700 G
Spin Speed: 0-19,940 rpm
Cycle Time: 0-99 min/sec
Test Radius: 2.0" to 5.0" |
|
|
| Motor: |
|
Direct
Drive |
|
|
| Acceleration: |
|
0-16,000
rpm
<90 sec (E-70)
<120 sec (E-50) |
|
|
| Deceleration: |
|
16,000-0
rpm
<90 sec (E-70)
<120 sec (E-50) |
|
|
| Overall
Dimensions: |
|
30"W
x 39"D x 48"H |
|
|
| Weight
(net lbs): |
|
800 |
|
|
| Power: |
|
208
or 230 VAC, 60 Hz, 40 A
220 or 240 VAC, 50 Hz, 40 A |
| |
|
|
|
| |
| |
|
|
|
